Motorcycle Car General Vibration Induction Sensor Alarm Anti-theft Device Keyless System Auto Remote Central Kit Locking
Motorcycle Car General Vibration Induction Sensor Alarm Anti-theft Device Keyless System Auto Remote Central Kit Locking - Image 2
Motorcycle Car General Vibration Induction Sensor Alarm Anti-theft Device Keyless System Auto Remote Central Kit Locking - Image 3
Motorcycle Car General Vibration Induction Sensor Alarm Anti-theft Device Keyless System Auto Remote Central Kit Locking - Image 4
Motorcycle Car General Vibration Induction Sensor Alarm Anti-theft Device Keyless System Auto Remote Central Kit Locking - Image 5
Motorcycle Car General Vibration Induction Sensor Alarm Anti-theft Device Keyless System Auto Remote Central Kit Locking - Image 6

Motorcycle Car General Vibration Induction Sensor Alarm Anti-theft Device Keyless System Auto Remote Central Kit Locking

$ 10

SKU: 1005003183299198 Category:

Description

Description:
This product uses a vibration sensing system consisting of a buzzer and a contact spring, which is characterized by high sensitivity, fastness and high performance. It is widely used in car anti-theft and other security products. It has become the first choice for low cost and practical use in modern security.
The internal piezoelectric ceramic sheet and spring weight structure are used to detect the vibration signal, and the amplifier signal is amplified by the LM358 and output control signals. It has the advantages of low cost, high sensitivity, stable and reliable operation, and large adjustable range of vibration detection. On the anti-theft system of steam and motorcycle cars, 80% of the vehicle alarms use such sensors. The sensor uses SMT chip technology inside, and the imported components are assembled. The sensor can also be combined with single-chip microcomputer, wireless transmitter module, wired alarm, etc. It is used in combination and has a wide range of uses.

Parameter:
Material: ABS + Electronics
Output current: ≤100mA (maximum load current)
Sensitivity: -105dB
Quiescent current: ≤6mA
Rated working voltage: 12V
Minimum operating voltage: >5V
Trigger pole number: unipolar trigger output
Interface mode: XH2.54 or 2510 three wire interfaces (interface socket is 2.54 3P common models, if you need 2510 3P interface, you can contact us)
Trigger mode: negative trigger to ground or positive 12V trigger
Working voltage: DC10V-16V
Sensitivity: the twist can be debugged
Indication mode: LED light red light indication

Description:
1. The blue line is the signal output output by the 358 op amp. If the signal is not vibrated, it is high (the IO port should be pulled up), and if the signal is vibrated, it is low (signal to ground).
2. Red line power: +12V
3. The black line is the ground line

Notes:
If the output is connected to the high level, it needs to add a resistor of 100 ohms or less. If you want to drive the wireless transmitter module, you can not replace the resistor. The red and black wires are connected to the positive and negative power input of the module. The number (DC alarm horn) is preferably an external relay control to avoid large current damage to the sensor internal components (for reference).

List:
1*1m/39.37in black sheathed wire + anti-theft device
1*Instruction

1. About Feedback:

1.1 Please leave positive feedback and 5 stars if you are satisfied with our items and services. 

1.2 Feedback is very important for US, So please contact us immediately BEFORE you give us neutral or negative feedback.We will do our best to solve any problem and provide the best customer services. 

1.3 It is impossible to solve it if we do not（don’t） know about them!

2. What are the available methods for payment?

2.1 We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

2.2 Note: Others about payment VIA this link: https://service.aliexpress.com/page/knowledge?pageId=37&category=1000021991&knowledge=1060068630&language=en

2.3 Payment must be made within 3 days of order.

2.4 If you can’t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.

3. Aabout Shipping:

3.1 WORLDWIDE SHIPPING. (Except some countries and APO/FPO),Orders processed timely after the payment verification.

3.2 We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

3.3 The images shown are not the actual item and are for your reference only.

3.4 SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.

3.5 If you have not received your shipment within the period,? please contact us (immediately). We will track with shipping company as soon as possible and reply you. 

3.6 Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

3.7 Seller are not in charge of import duty, buyer is responsible for that. Any dispute caused by this is unreasonable.

3.8 BR buyer please provide the CPF or CNPJ, it will be better for you to get it ASAP. thanks

4. Return and Refund:

4.1 You have 7 days to contact us and 30 days to return it after received it. If holding on it more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. 

4.2 There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.

4.3 All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return.

4.4 We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.

4.5 We will bear all the shipping cost if the product(s) is (are) not as advertised.

Related products